February 2012 Archives
in layers:
1. existing plan
2. division of land
3. grid
4. road marking & pavement
5. factories
6. loading /sotrage
7. accommodation
8. service building
9. leisure
10. retail
11. canteen
12. offices
13. schools
14. parking
15. green
16. water
will probably eliminate some of the layers (combining some of the layers together)
in full:
here's the model, need printing the wallpaper out still:
the shadow is really obvious on this one, might need some lighting?
also started laser cutting a sample of the layer drawing, but haven't yet put the paint on, which I'll finish tonight (the picture is not telling much atm sorry)
and here are the drawings that come with it, probably won't show them as drawing in the end anyway. Also I'll turn the first stage (before development into drawing too):
was also supposed to start some photoshop of the 'picture tag', will try ...
Overview of the layer drawing:
accommodation blocks:
This is the leisure section - covering the factor sector:
the cover layer is traced from the Orlando water park, a lot more to figure out before it would fit the layout of the factory underneath ...
started to locate drawings on the story board, this is just to give a quick idea of what images I'll need and where they'll be coming from the site, will need more pictures in the story-board as well as fixing the base layer:
here are the pictures from the story board enlarged:
the foxconn morning exercise routine-
sketch of the main entrance (fake) -
sketch of the main entrance (real) -
apart from the story board, also had been testing out the model:
overview of the billboard as the cover layer.
LHS: buildings all the same height
RHS: building as various height (still need the billboard layer)
from the direction of the satellite:
it is only covering the building at the moment, will later need to work out ways to join the cover layer between building
zoom in of the billboard structure:
(billboard is too thick at the moment, and still need to attach an image on top of them, will work on that tonight)
First, here's a quick sketch of the thick drawing
i'm building the base of the model at the moment:
now working on the floor plan of the accommodation blocks:
a wip for the interior of real foxconn:
also collecting google clips for leisure areas:
a try of the golf-course wallpaper on Foxconn map:
I have been tracing the position of the factory on google map, both of the plan and roof plan, hoping to understand more about the google view. These will be the different layers of the thick drawing... more layers to come
