Orlando

the green pieces are the standard 4 by 8 formwork panels, the blue pieces are the large size cut formwork panels

and the red pieces are the small cut formwork panels(these ones arent big enough to take a reference number at 1:20, and so must be dealt with separately

it is big.. these dimensions are in metres

reinforcement bars at 700mm centres.

strips of timber fixed to plywood ribs for the moderately curved corner, then laminated CNC cut polystyrene for the filleting tightly doubly curved section at the top

a technique for producing doubly curved formwork with a timber gridshell... this doesn't require profiles to be cut from plywood.

spans

primary spans transferring forces down to the ground in red.

secondary spans springing from primary spans in pink.

The traditional plan configuration of a church nave (blue) surrounded by chapels (yellow) for example in San Lorenzo above has been transformed in this project below into a church nave (blue) surrounded by cinema screens (yellow).

  
to reduce the severity of the cantilevers some of the footings have been amended.

also to make more rational load paths for some of the spans the internal volumes of the cinemas have been manipulated.

here is the base 3dmodel with these amendments (finally with previous configuration)